Correcting an innovation oversight sometimes hits you hard!

I’ve had one of those weeks where a certain realization took hold, something that had been nagging away at you suddenly surfaces and slaps you in the face. Ouch!

I have just completed my own gap-analysis on how I have explained the Executive Innovation Work Mat methodology and its value.  It actually was a bit of an eye opener. I was surprised in this audit of all associated posts, articles and papers written by myself or in collaboration with Jeffrey Phillips, that there were some very glaring gaps in my posts on explaining this methodology.

The Seven Components that make up the Executive Innovation Work Mat

The Seven Components that make up the Executive Innovation Work Mat

The Innovation Work Mat has seven components or domains

What was crazy here is the fact I have the research, the component parts all worked through, structured and being used in actual engagements to prompt the essential discussions, yet I had not been publishing these enough through my posts to underpin the methodology.

I had been missing essential domain component messages that are the very essence of why you need to work around the entire work mat as essential. I was missing the opportunity to publically talk about ALL the parts as it is the combining of these that does provide its value as an integrated approach to innovation that can cascade throughout the organization.

Continue reading

Preparing the secret sauce for innovation delivery.

The secret sauce required for innovation delivery sometimes can be hard to itemize but knowing the ingredients and constantly improving on them wil make your ‘sauce’ stand out from others.  For many it seems, execution or final delivery of the innovation is simply not given enough attention inside many organizations and that needs to certainly change and not just left to chance or delegated out as the less important stage.

For me, clarifying and committing resources on the innovation delivery part is a critical task to get right. I’ve discussed that elsewhere, but if your final delivery is wrong then all your preparation and effort simply ‘goes out the window.’

It is like a restaurant kitchen- correct delivery of the item makes or breaks all the hard work beforehand and if the final garnish or sauces are wrongly executed, the meal itself fails and it leaves the customer dissatisfied, irrespective of the original efforts put in. Continue reading

Mission Critical for Innovation – Final Delivery

Why is it that for some firm’s innovation seems to be incredibly rewarding yet for the majority it remains at best an unfulfilled promise. Why does innovation present such a stark choice, often fraught with difficulties for many, yet so simple and successful for the few? Innovation delivery is one of those differentiation points.

Let me sugggest here nine points needing your consideration when it comes to thinking through the innovation back end delivery part. Execution as I have outlined in a previous blog, is the final rugged frontier- the tough one to truly master as it is so variable in its makeup. Just consider: Continue reading

The rugged final frontier of innovation – Execution.

I always smile when people talk about the ‘fuzzy’ front end of innovation, ‘fuzzy’ tells a story. I think we should name the back end of innovation as ‘rugged’ to tell an equally important story. This is the end where the ‘last five yards’ separate the winners from the losers. The race before then has been made up of often huge quantities of stamina, fortitude, planning, exploration and getting into that necessary innovation rhythm to get yourself within sight of the finishing line, the point when the product, service or business model has one final gasp and passes over that internal finishing line.

The critical passing-through and launch phase where the finished concept goes through that clear defining moment, out into judgement day, where we enter that hostile environment, the market place, sometimes to loud cheers, sometimes to defining silence.

Welcome to the real world of judgement where those experienced enough in frontier-ship  knows the terrain they are passing over, certainly not for the first time and can manage this again to have a further final successful outcome- better sales!

Hitching your wagons and moving out for the first time.

Discovering any innovation is hard work. What we all want to do is provide something new, an advancement on something that is already there, or it is simply not really innovation. We search hard for making those breakthrough moments when you hit on that undiscovered ‘unmet need’ and the market place just loves it.

Getting to this point you need to recognise all the core needs of making this journey. You need plenty of innovation capabilities to overcome many hitches in the journey of market place acceptance. Here are four:

  • Innovation execution is not a smooth process, you often have no control over making your innovation activity a steady process, it is full of surprises. It is how you manage these will determine winners from losers.
  • Innovation is serendipitous, full of fortunate discoveries, often you stumble across something that takes it further forward. Often you cannot even replicate that moment. Other times it is simply elusive until by accident and through patience you get there. You resolve the obstacle, you overcome the objection, you move on.
  • Often innovation is often less than spectacular. You get to the moment of rolling drums and voila, whipping back the covers you cry “there you have it!” You offer something less than spectacular, it is so boringly such  a ‘duh’ moment, you are ready to crawl back under the rock.
  • Your innovation execution lacks momentum. Even with lots of initial enthusiasm and best intentions, suddenly all that necessary energy dissipates and falls away. What started as a bang ended with a whimper and a desperate need to finish this off and move onto the next thing.

Why is this?

What separates successful execution innovators from the rest of the pack?

Innovation needs to be a clear discipline; there really is no getting away from it. Innovation needs to be integrated from idea to execution, to full end market delivery. It often boils down to discrete and manageable tasks well managed, well orchestrated and planned, well supported with all the best resources available to make a success of innovations implementation.

Execution, that final all-important phase needs leadership. Leadership sets the tone and communication what is important and is always ready and able to help the implementation team succeed as best they can. These leaders need three traits- 1) a bias for action irrespective of the problem, 2) knowledge and contacts in the market place themselves to gauge quickly issues and roadblocks,3) they incentivise  the execution team for providing break through solutions and moving them forward quickly.

How many times though does leadership seem to slip away at the moment of execution? They feel the hard ‘yards’ have already been covered, the innovation is ready to go and they commit a series of execution sins.

They extract critical resources at the wrong time and work them back into the organization far too early. The research group have moved on, the product manager has been re-assigned, the research didn’t cover that last concept change to check its value in the market, the final packaging design was subjected to last minute economies and runs the risk of compromising the final delivery of the product. This sin list could run on and on, you know these as they constantly happen.

The leadership had the pedal pressed to the floor so hard to get the product ready for launch, they just took their foot of this pedal at the crucial moment and the product goes ‘sliding’ out the door and simply crashes into that first formidable barrier, customer rejection and you were not ready for it. So much becomes “at risk” if you have not given the right execution focus.

Leadership needs to be immersed in the deployment zone

Leadership needs to be as much in their ‘deployment zone’ as the team assigned the job. They set and live the expectations, they define the critical deliverables, establish accountability and resolve the conflicts quickly, they install metrics that are execution specific, they actively seek commitments from the team, share in achieving them from their customers and they share the good and bad parts of the progress back into the organization. They communicate accurately and frequently, keeping on top of issues, breaking down problems, reaching back into the organization for help when help is needed. They offer true leadership, from the front.

Execution through this commitment has become mission critical and all need to see this. It becomes, over time, the force for perpetual execution. Inertia is not spoken of-ever!

The sustaining execution machine

Four attributes that need constantly developing well at the execution stage

  • Agility – that ability to simply move quickly and be adaptable. To grasp the problem, to move on it and constantly explore all the different angles that will resolve the issue and keep execution plans on track.
  • Seek healthy debate – asking, probing, and showing a constant interest in what is going on, what resolved any issues, simply having that cultural bias of ‘qualified’ risk taking and openness, discussing and learning so you are building up always knowledge and experience.
  • Effective communication– ensuring there are the mechanisms in place to ‘flag’, to help, to reach out and ask for help. Use communication not to hide issues but to seek out from others ways to break down the barriers.
  • Provide appropriate resources – the need to provide the same energy and resource commitment, skills and experience that went into the discovery and development of innovation and ensuring equal ‘vested’ interest from all is there in achieving the concepts aims at the execution time; at the moment of customer experience. Gather the resources quickly, learn fast if it doesn’t and work to find solutions that can resolve it, so it does.

The five phases of execution adventure – just keep those wagons rolling!

The ‘innovation execution emotional wave’ makes it hard ground to travel.

I was reading recently about Gartner’s hype cycle, one article written by Graham Horton gave me a thought for this piece. The hype cycle was developed to visualise the media coverage of a new technology and it goes through five distinct phases.

Actually I really think one version of this applies, with adaptation (and due acknowledgement to them) for the ongoing journey we often face in execution of a product once it has entered the market place- that hostile terrain I spoke about. We go through a real ’emotional wave’ of innovation execution.

Innovation's execution emotional wave

  • Trigger:  in this case is our execution or launch. When the product is launched and comes up against customer comment, reaction and acceptance/ rejection
  • Inflated expectations: the over-enthusiasm and expectations of the innovation meet the reality of the market place.
  • Disillusionment: Either the innovation fails to make the changes it was expected so the company needs to begin a rapid re-think or the market response has been less than overwhelmed. Enthusiasm diminishes rapidly and action needs to be taken
  • Enlightenment: The innovation on hand begins to be understood, to be adopted, to be adapted and fits within the needs of the final consumer. Sometimes this comes from heavy advertising, repackaging, repositioning or simply listening to the issues and rapidly making the necessary adjustments to match needs
  • Productivity: The adjustments have been resolved, the peaks and troughs have been worked through, and it becomes appropriate to the customers’ needs. This might have needed second and third generation modification and upgrade but it does the job it was conceived to do.

Bringing the innovation execution wagon train home is hard.

I do think new products and services do go through this ‘emotional execution wave’. Execution is hard; it is not simply the ‘last five yards’ it goes well beyond the internal finishing line. Innovation does not stop when it goes out of the organizations doors, it actually only just begins, and it has to prove itself. To make innovation work, it is only when it is in the market place, judged by customers sufficiently enough to stump up their cash we have a successful innovation. To get there is often travelling over some rough, tough terrain and the more you are exposed, the more you learn. When you execute you need to deploy a significant skill set and dedicated resource to bring home the results.

Fuzzy front ends, huh! Markets have these tasty morsels for breakfast if they, firstly, have not listened to the market needs in the first place but more importantly, have not been executed correctly. The back end, execution, is certainly rugged terrain, that final frontier to travel that is for sure.